- Joined
- Sep 28, 2013
- Messages
- 4,302
"Any hint of rubbing or vibration means stop trying and either figure out what's going on or go use a hacksaw."
what's happening when you get rubbing or chattering is that the tool is trying to tell you something. Not necessarily to stop, but to change speed, feed or DOC. In this case rubbing or chattering is the tool saying "slow the speed, increase the feed". You have to listen to your machine, it tells you alot of stuff!
what's happening when you get rubbing or chattering is that the tool is trying to tell you something. Not necessarily to stop, but to change speed, feed or DOC. In this case rubbing or chattering is the tool saying "slow the speed, increase the feed". You have to listen to your machine, it tells you alot of stuff!