1992 Enco 110-1340

[IamNotImportant]

I think so. I have a 2004 13x40 I bought new.

you are about an hour or so from me.. wonder if i can come up sometime and check it out

 

[NCjeeper]

Yeah sure.

 

[Harry Knutz]

I have a 1992 Enco 110-1340 I’m looking for the gear that rides up under the rack gear that runs the apron back and forth


Sent from my iPhone using Tapatalk

Your lathe is the same as the Birmingham ycl 1340gh, The brass gear that mates with the worm in the apron for the longitudinal feed seems to be the weak spot for this lathe model, And actually quite a few more import lathes, People don't make sure the aprons are full of the proper mineral oil and the gear wears out quickly. I have seen several of this model of lathes for sale with the power feed inop. Parts are non existant for these, Grizzly does not support this lathe anymore, Their part number was Grizzly GHB1340, Here is a pic of the Griz, A Jet 1340GHB And A pic of the Birmingham, And at the bottom the Enco. These are actually really good machines.




And here is the Enco Equivalent

 

[Harry Knutz]

You might try Penn Tool, They are a Birmingham dealer and the gear should fit your Enco, But most of these dealers are more than happy to sign you up for a new machine, But they don't stock many parts and could care less about support after the sale.