hello everyone new guy here, I have a doall 16 inch vertical bandsaw, it is very old and very heavy! I have had this saw for about 2 years and I decided to get the blade welder working, unfortunately the man that I bought it from had a mouse problem, the wires are chewed apart pretty good. my question is does anyone have one of these old blade welders they could take some photos of the back of it so I can maybe see were some of these wires go to. thanks for reading!
-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
[Bandsaw] 220 Volt Single Phase Doall Blade Welder
- Thread starter angus69
- Start date
- Joined
- Feb 7, 2011
- Messages
- 5,039
A model number would help. But if you contact doall they may get you the wiring diagram
.
http://www.doallsaws.com/contact-us/customer-support
.
http://www.doallsaws.com/contact-us/customer-support
This is the old blade welder that I am talking about. Several of the wires are chewed into and I don't know where they go. My electrical skills are limited. I thought if I could get some pictures of the exact unit that I could put the wires where they go. Thanks!