220v to 110v motor

bill stupak

Registered
Registered
Joined
Feb 26, 2014
Messages
250
Can this motor be switched to 110v? It's from a Lienhard single lip cutter. I can, but would rather not run a dedicated 220v outlet for it.lienhard.jpglienhard 2.jpg
 
No. That is a 3 phase motor. You will need a converter or VFD to run on single phase.
 
It appears to be either 220 V or 440 V, and yes, 3 phase.
 
It appears to be either 220 V or 440 V, and yes, 3 phase.
I do not think so. usually multi voltage motors have 6 winding's to configure for the 2 voltages. I only see three, that can be swapped from y to delta configuration.
 
Last edited:
Yes, it's 3 phase of unknown horsepower rating- 0.18 CH must be the size rating but not sure what units they are using. 3240 is the rpm. Hmm, Oerlikon, didn't they make firearms during the war?
Mark
 
Other single lip cutters of this size are around 1/4 hp. I have found an alternate motor to use on it.
 
Back
Top