- Joined
- Jul 27, 2018
- Messages
- 50
I'm hooking up a VFD to power a Clausing 1500 lathe. I know this machine was powered by standard commercial 3 phase when I picked it up and tested it, although I don't know for sure if it was 240v or 480v, assumed 240v. There's no other electronics in the lathe except reversing switches. I got my VFD and starting going through the numbers and found this 200v a little confusing. Any help deciphering what numbers I need to put into the VFD would be helpful.
Thanks,
-Bill Warner
Thanks,
-Bill Warner