- Joined
- Nov 5, 2016
- Messages
- 1,419
The Reliance 2HP motor I got with my new to me 13" South Bend lathe was labeled 200 Volt as well. At the bottom of the tag is also stamped "SUIT 208V". I just took a picture of it the other day so I could list it on Craigslist.
Your drive says +/- 20%. I would hook it up and if you have a current meter take a reading on each leg and see what you get, just to make sure you're in the range.
Ted
Your drive says +/- 20%. I would hook it up and if you have a current meter take a reading on each leg and see what you get, just to make sure you're in the range.
Ted