- Joined
- Oct 14, 2014
- Messages
- 1,966
My son has a #2 cinci tool and cutter grinder he got for hauling it off.
He knows it was running on 440 in the shop it came out of. Inspection of the 9 motor wire today shows all the lead numbers have faded to un readable. He says he can not find a readable name plate for how to wire it either. the motor connection box has sat full of oil for a VERY LONG time.
Is it fairly safe to assume the below wiring diagram is the correct one???
If so, he knows T1 T2 T3 cause they are the ones hooked to the in coming line
Is there an electrical test to ID T4 to T9. He knows a little bit cause there are three pairs of wires.
He knows it was running on 440 in the shop it came out of. Inspection of the 9 motor wire today shows all the lead numbers have faded to un readable. He says he can not find a readable name plate for how to wire it either. the motor connection box has sat full of oil for a VERY LONG time.
Is it fairly safe to assume the below wiring diagram is the correct one???
If so, he knows T1 T2 T3 cause they are the ones hooked to the in coming line
Is there an electrical test to ID T4 to T9. He knows a little bit cause there are three pairs of wires.