4 axis cnc Plasma/Router build

jumps4

Global Moderator
H-M Platinum Supporter ($50)
Joined
Apr 30, 2012
Messages
2,241
About 2 years ago my neighbor asked if I would help him build a cnc plasma table. After a few meetings we decided on the parts needed to start the project and he ordered them. motors, drivers, circuits boards rails ball screws and everything arrived in about a month at my home. 10 foot long ball screws and rails for a 5'x5' table. 2.2kw spindle motor and driver for a router add-on .
Everything sat at my home for about 1 year with no contact from my neighbor who had moved, until about January of this year.
Long story short the project has begun and I wanted to post the story in pics as we go.
The table is 5'x5' x and y and 16" for z, 4th axis that will take up to 40" round tubes. ( fire pits ) and automatic torch height control. The plasma table will have a fast fill water table and can convert to router by placing cover on table.
due to my wife's poor health I may not reply fast or often but I will try to post as I can.
Thank for viewing
Steve

20171117_134152.jpg

20171117_134154.jpg

20171117_154942.jpg

20171117_185030.jpg

20171120_124217.jpg

20171120_124221.jpg

20171120_124229.jpg

20171120_124233.jpg

20171120_131227.jpg

20171121_141643.jpg

20171121_163436.jpg

20171122_145339.jpg

20171122_152311.jpg

20171122_171110.jpg

20171122_171139.jpg

20171125_131757.jpg

20171128_175717.jpg

20171128_182456.jpg

20171128_182459.jpg

20171205_183633.jpg

20171212_161520.jpg

20171220_142644.jpg

20171220_142647.jpg

20171220_142820.jpg

20171220_185141.jpg

20171220_185145.jpg

20171220_185235.jpg

20171220_185243.jpg

20180226_165902.jpg

20180226_165927.jpg
 
Top