I ran across these guys who built a 4 cylinder Briggs & Stratton engine out of 4 one cylinder B&S engines. Kind of looks like an old 4 cylinder motorcycle engine. Petty cool and they are using the small HF mill, a drill press, a welder and a small Atlas Iathe. I would have liked more information on how they made the cam and crankshaft and set up the distributor. The videos are short so there are lots of them. Here is the first one.
-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
4 cylinder Briggs & Stratton!
- Thread starter DiscoDan
- Start date
- Joined
- Apr 30, 2015
- Messages
- 11,259
A classic boy meets engine(s) story
with a greasy ending
with a greasy ending
- Joined
- Mar 5, 2012
- Messages
- 314
What a endless story this could be
the small Villiers fourstroke industrial engines had a separate block and crankcase,and Ive seen some of the 250cc ones made into a henderson deluxe lookalike.,with a fabricated crankcase and cam and crank from a s/v car engine with usable dimensions.Possibly a Ford Prefect.