- Joined
- Dec 6, 2012
- Messages
- 2,677
I picked up the 1D.
Got everything working today including the powerfeed!
No chips yet.
Maybe next week....
Need help getting the 40taper to Cincy Monoset out as I've got a nice selection of NMTB 40tapers.
I have no manual so I'm guessing how this works.
She is stuck and I don't want to get her wrong!
1. Raise the spindle manually.
2. Put the dial direction selector in "S" for spindle.
3. Lower the spindle manually until the push button on the direction selector seats itself in the drawbar.
4. Manually raise the spindle until the spindle doesn't raise any further.
5. Insert the wrench on the drawbar flats.
6. Standing in front of the mill move the wrench to the Left (Right hand thread.
She is sticking badly.
I've seen threads on other forums recommend a hammer and/or a cheater bar.
Am I supposed to engage a spindle break, stand on my right leg or flap my arms like a chicken or anything special to get this to loosen?
Suggestions?
Thank you.
Other than the really bad baby blue paint brush living room paint paint job, and not having been looked at for maybe 10years she really is in remarkable condition.
Suggestions on getting the forty taper loose?
Thank you.
Daryl
MN
Got everything working today including the powerfeed!
No chips yet.
Maybe next week....
Need help getting the 40taper to Cincy Monoset out as I've got a nice selection of NMTB 40tapers.
I have no manual so I'm guessing how this works.
She is stuck and I don't want to get her wrong!
1. Raise the spindle manually.
2. Put the dial direction selector in "S" for spindle.
3. Lower the spindle manually until the push button on the direction selector seats itself in the drawbar.
4. Manually raise the spindle until the spindle doesn't raise any further.
5. Insert the wrench on the drawbar flats.
6. Standing in front of the mill move the wrench to the Left (Right hand thread.
She is sticking badly.
I've seen threads on other forums recommend a hammer and/or a cheater bar.
Am I supposed to engage a spindle break, stand on my right leg or flap my arms like a chicken or anything special to get this to loosen?
Suggestions?
Thank you.
Other than the really bad baby blue paint brush living room paint paint job, and not having been looked at for maybe 10years she really is in remarkable condition.
Suggestions on getting the forty taper loose?
Thank you.
Daryl
MN