4140 steel bars

GarageGuy

Active User
Registered
Joined
Nov 9, 2013
Messages
790
I have maybe 20 pieces of 4140 steel bar. They are 1" x 1 1/2" and twelve to sixteen inches long. Would trade for some brass, bronze, aluminum, or drill rod. Traded some to a knife maker last summer, but still have some left.

I also have some 2" diameter by 14" long pieces of 10xx steel.

Would have to pick up in person. I'm about 45 miles northwest of Chicago.

GG
 
Would you happen to still have a few bars? Would you mail any?


I’m happy to PayPal or what ever we could work out.
Thank you, I have a few projects in mind.
 
I was hoping not to ship them because I would have to saw them down to 8" pieces to get them in a flat rate box. If shorter pieces are ok with you, I could do that. I sold a bunch to a couple of knife makers in our local machinist club, so I'll have to check and see how many I have left.

Thanks!
 
I’d be interested perhaps in a price to ship me 2 8” pieces. Thank you for your time. You can send me a private message if you’d like.
 
I you still have some of that 4140, I have some brass.
1/2 and 3/8 rod in 6" lengths.
Some 3/4 and 1" rod
A couple pieces 1-1/4X 2" one 1.4" the other 2.1" long.
Some 1/8" plate.
some 1/4X1" flat bar
 
Hi Mark! Sorry for the delay, I didn't see your message until now. The 4140 bars have all been traded away. Thank you for your offer!

Curt
 
Curt, no delay, I just replied yesterday, thanks for getting back and all the best.
Mark,
 
Back
Top