A wooden mock up today

malmac

Registered
Registered
Joined
Jun 7, 2016
Messages
361
I have found that making wooden 3D models help me avoid expensive mistakes.

MAL_9654.jpg

So here is the mounting point I am making for my slide on camper. Wooden model helped me determine a workable size and concept.


Mal
 
... That looks like a mighty nice chunk of wood too!

Ray
 
Here is the bracket fitted to our ute and almost ready to be finalized. Just need to remove the masking tape and use some anti sieze on the stainless steel bolts. Putting the nut and washer up into location was fiddly. So I used super glue to glue the washer to the nut - that way I only had to juggle one thing rather than two. Have never done that before and it worked a treat.

Mal

MAL_9660.jpg
 
Back
Top