- Joined
- Aug 22, 2012
- Messages
- 4,111
If you do a lot of tapping with small dia taps I would suggest a small edm machine to be a necessity.
My thrown together bodge has been a project saver many times over.
https://www.hobby-machinist.com/threads/tumbler-reverse.10122/#post-124435
check from post 19 and the link to the plans comes a way down.
Its very well worth it although a bit slow for a production shop.
My thrown together bodge has been a project saver many times over.
https://www.hobby-machinist.com/threads/tumbler-reverse.10122/#post-124435
check from post 19 and the link to the plans comes a way down.
Its very well worth it although a bit slow for a production shop.