Ammco shaper decal dimensions

jwmay

H-M Supporter - Gold Member
H-M Supporter Gold Member
Joined
Dec 3, 2017
Messages
1,893
I’m having a replacement decal made for my shaper. Does anyone have the dimension of the height or width? Or both?
 
Mine doesn't have a decal on it, but if this is the I.D. tag that you're asking about, the dimension is 2.25H x 3.35W.

Ted

100_3036.JPG
 
This is the decal. It goes on the little round door I believe. There was a red “something” on my door before I stripped the paint off it, and through internet searching, found examples. I believe this came on them originally, but could be mistaken. Thanks though. :)
0D020F16-FD8B-4C43-A3F8-E30BF077B0F4.jpeg
 
Mine doesn't have the decal either. But from pictures and a measure of the door it shouldn't be too hard to make an educated guess. This is something I intend to make for my shaper later this summer. I had a sign business for many years and have done this type of thing for numerous customers it shouldn't be too hard to do.
George
 
Back
Top