Atlas lathe bed width and rail thickness on the 10/12 power crossfeed model.

[Headrc]

Excellent ...glad you acquired the TH-54. And looking at it ...I may try a different approach if I pursue this. Because of the issue of cost for the saddle and apron assembly. But I will continue to look around as there is no immediate need. Thanks for the response.

 

[wa5cab]

The 10F carriage (which is also used on the 101.07403, 101.27430 and 101.27440) will fit the earlier beds. And aside from some (hopefully) improvements to the gears inside, the 10F without QCGB used the same FWD-OFF-REV gear box as used on the earlier machines.