Atlas Mandrel (Arbor) Press #1 question

[tfleming]

Does anyone out there own an original Atlas #1 mandrel press? I just scored one, but the handle is missing. I can make a handle, no problem, but I would like to match the original length if possible. I am thinking 18" would be a good start, but thought I would post here first to see if anyone has one and can measure the handle. thanks, Tom

 

[Superburban]

I bet you could come close by looking at these pics.

ATLAS No.1 Mandrel Hand Arbor Press 10-1/2" T x 7" Throat Cast Iron | Bullseye Industrial Sales

bullseyeindustrialsales.com

 

[tfleming]

I bet you could come close by looking at these pics.

ATLAS No.1 Mandrel Hand Arbor Press 10-1/2" T x 7" Throat Cast Iron | Bullseye Industrial Sales

bullseyeindustrialsales.com

ok that helps. The ram is 16". Looks like 18-20" will do it. Thanks!

 

[MACHOMAN]

Great that link helped


Sent from my iPhone using Tapatalk Pro

 

[MACHOMAN]

Great that link helped


Sent from my iPhone using Tapatalk Pro