Atom3D hole callout

Lionel

Registered
Registered
Joined
Oct 16, 2018
Messages
5
OK I'm new to this forum so not sure if I am doing this correctly or in the right place, but here goes.

I have been looking at Atom3D for a day or two but cannot work out how to use the hole call out feature or the thread display when creating drawings. Anybody know what I am doing wrong, or better still how to use these features?
 
Right click in the 2D view and select "insert hole callouts".

Benz
 
Right click in the 2D view and select "insert hole callouts".

Benz
Yes I did this, but nothing happens, and looking at a comparison between Atom3D and the full blow package it looks like it is not implemented, or am I wrong on this.
 
I don't have Atom, only the pro package, and perhaps you should be putting in a ticket on the Alibre website and I second Ken's direction to join the forum and ask there. You will get much further than you will here in this regard.

Benz
 
If Atom is like the earlier version of Cubify Design, the hole call out function does not actually change the drawing by drawing threads. Instead when you create a drawing of the part it will call out the hole as being threaded with such and such diameter and pitch.
 
Back
Top