B&S gears

RustyD

Registered
Registered
Joined
Mar 12, 2019
Messages
13
I am looking for any Brown & Sharp Gears that are 6 spline and .750 dim.inside, any will work.
 
What do they fit? The only splined gears that I have seen are Cincinnati.
 
What do they fit? The only splined gears that I have seen are Cincinnati.

Brown & Sharp #000 plainer, see pic. .750 od. and the root .620. key .188 6 spline.
 

Attachments

  • IMG_1951.JPG
    IMG_1951.JPG
    2.9 MB · Views: 12
OK, I looked it up in a 1940s catalog, and note that it is a small manufacturing milling machine; I am especially partial to B&S machines and tools, having owned three of them since I was in my '20s, a #3B heavy, a #2 single overarm universal, and finally a 1943 vintage #2 universal without rapid travel, it's an addiction, what else can I say! Also have a B&S #0 bench grinder, belt drive, has taper fit QC wheel collets.
 
Thank you for looking, I am redoing this little machine for my shop every thing is working now, I just need the change gears for the table feed.
 

Attachments

  • IMG_1891.jpg
    IMG_1891.jpg
    2.3 MB · Views: 6
Back
Top