Birmingham Mills?

Got it into place! Found a couple of things that need some slight repair (the knee extension and handle are bent funny, and a broken locking handle), but in place, running, and vise mounted! I'm amazed how small my DX6 looks on it :)

Going through most of the stuff that came with it, so have a decent haul for Papa Charlie when he can stop by :)
Looks real nice in the shop. Also looks as though you found a new home for your old mill. Nice not to have a bunch of equipment build up that only takes up space.

Well, as far as stopping by, you will probably need some time to sort things out. That will give me time to plan a trip. Looks like some things got rearranged. Our first choice for retirement was in Coos Cnty but with the powers that be in Oregon we are also looking at other places. So have decided to buy an RV to do some traveling and check things out. One state that is looking interesting is WY.

If you have another buyer, please don't hesitate on me. I would not want to hold you up. ;)
 
Looks like I spotted a B&S 618 Micromaster in the background ! :encourage:
 
Between myself and a buddy, this is what is left of the stuff @Papa Charlie .

Let me know if it is worth a ride for you.

Shars 5c collet set, and collet blocks. Unnamed boring head w R8, import adjustable parallels, snap gauges, and an import set of end mills.

Also some edge finders (1 is B&S) and an import 6" vise with base.
 

Attachments

  • PXL_20210802_203717339.jpg
    PXL_20210802_203717339.jpg
    3.4 MB · Views: 101
  • PXL_20210802_203723292.jpg
    PXL_20210802_203723292.jpg
    4.1 MB · Views: 101
  • PXL_20210802_203743016.jpg
    PXL_20210802_203743016.jpg
    3.7 MB · Views: 102
  • PXL_20210802_203806471.jpg
    PXL_20210802_203806471.jpg
    4.1 MB · Views: 95
  • PXL_20210802_203758045.jpg
    PXL_20210802_203758045.jpg
    3.9 MB · Views: 105
Back
Top