- Joined
- Mar 12, 2014
- Messages
- 1,531
If anyone is interested, I have two (2) Bridgeport style ball-crank handles (chrome) that I would like to sell for what I paid for them. They are brand new. I purchased them after ordering my PM932PDF mill and was going to install these upon arrival, however, I since changed my order to a BP style mill which already has this style of handle. I didn't care for the round style handles that came on the PM932PDF, or any of the RF45 clones for that matter.
An adapter needs to be fabricated to allow the use of these style handles on the mill but it is a pretty straightforward machining process on the lathe and then cut the mating surface on the mill. I believe there is at least one, probably more, youtube videos depicting this modification.
Here is a link to my classified ad if anyone is interested.
http://www.hobby-machinist.com/ozzmodz_classifieds.php?do=viewitem&itemid=261
Thank you.
Mike.
An adapter needs to be fabricated to allow the use of these style handles on the mill but it is a pretty straightforward machining process on the lathe and then cut the mating surface on the mill. I believe there is at least one, probably more, youtube videos depicting this modification.
Here is a link to my classified ad if anyone is interested.
http://www.hobby-machinist.com/ozzmodz_classifieds.php?do=viewitem&itemid=261
Thank you.
Mike.