Just purchased a Busy Bee 1244g that was in parts. I need to make one shaft for the auto feed that seems to be missing, but the rest seems to be there. Once I get it running, I can machine new shaft. I have got it together, but the wires have been disconnected. I saw from reading previous posts that user q20v has the exact same lathe. Pics from him could be exactly what I need. I also read the post by user zonk2 and looked at his wires, but unfortunately, his wires, although the same colours, come out of the motor in a different order than mine.
Below I have posted the wires that go from the electrical box to the motor. Pic one is the wires out of the motor. The second picture is of the wires coming from the electrical box. The colours are hard to see but they are green from the ground, black and white. The last pictures is the big wire that goes to the plug. It seems that there are too many wires coming out of it to go to a single plug.
I have the manual that came with the machine, but the wiring diagram is Greek to me. Any help wiring the motor and the plug would be appreciated.
Below I have posted the wires that go from the electrical box to the motor. Pic one is the wires out of the motor. The second picture is of the wires coming from the electrical box. The colours are hard to see but they are green from the ground, black and white. The last pictures is the big wire that goes to the plug. It seems that there are too many wires coming out of it to go to a single plug.
I have the manual that came with the machine, but the wiring diagram is Greek to me. Any help wiring the motor and the plug would be appreciated.