CAD Upgrade

Buffalo21

H-M Supporter - Gold Member
H-M Supporter Gold Member
Joined
Feb 24, 2018
Messages
1,044
Today I’ve officially upgraded my shop CAD program

I went from, Amish CAD 1.0. (paper and a pencil), to Amish CAD1.0.2. (paper and a pencil with an eraser)

this technology upgrade to me is staggering.................
 
Today I’ve officially upgraded my shop CAD program

I went from, Amish CAD 1.0. (paper and a pencil), to Amish CAD1.0.2. (paper and a pencil with an eraser)

this technology upgrade to me is staggering.................

And liberating I would say, so much less pressure
 
Lets not fergit the time tested Cardboard Aided Design system for fabrication as well, both are a must
for the serious hobbyist............:big grin:
 
Ah, yes, cardboard CAD! I once made prototype speaker enclosures out of cardboard. Unfortunately they sounded better than the wood ones! I had to try again!
In fact, my final system used cardboard tube enclosures for the woofers! They worked really well!
98fe18a66ecef0ca6f273330b0b739ff.jpg


Sent from my SM-G892A using Tapatalk
 
Back
Top