Centroid Acorn and CAM(post processing)

N2XD

H-M Supporter - Sustaining Member
H-M Platinum Supporter
Joined
Jul 31, 2016
Messages
73
To those who have made the conversion or upgrade to the Centroid Acorn. What are you using for using for Cam and what Post Processor are you using. This would be for the PM-940M or CNC. Thanks.


John
 
Fusion 360 is very popular now for modeling and cam. It has a centroid output processor. I believe it’s still free to education, hobbyists and even small businesses.
Jake
 
Hi Jake,
Are you using fusion 360 on your Centroid Acorn?
 
I guess my next question is, are you using the standard centroid post processor that is on the Fusion Post Processor web site? Thanks .


John
 
Centroid is one of the post processors standard in Fusion 360, no need to download it. It seems to work fine without need to customize it. Also, see the picture:

Screen Shot 2018-10-21 at 12.01.25 PM.jpg
 
I see said the blind man. Thanks Jake.
 
Back
Top