• We want to encourage those of you who ENJOY our site and find it USEFUL to DONATE and UPGRADE your membership from active member to donating or premium membership. If you want to know the differences in membership benefits, please visit THIS PAGE:

    https://www.hobby-machinist.com/premium/

    Donating memberships start at just $10 per year. These memberships are in fact donations that help pay our costs, and keep our site running!
    Thank you for your donation, God Bless You
  • June Project of the Month (Click "x" at right to dismiss)
[4]

Chinese Stand Alone Controllers

[3]
[10] Like what you see?
Click here to donate to this forum and upgrade your account!

magicniner

Brass
Registered Member
Joined
Oct 21, 2017
Messages
398
Likes
356
#1
I have a mill to convert and rather than another Mach3 license, PC, OS license, display, keyboard, mouse etc. I bought a 4 Axis DDCSV unit from a supplier with UK stock.
I eventually decrypted enough of the Chinglish manual to work out how to load and start a program. The manual says it's FANUC so I just loaded the default FANUC Post Processor in my BobCAD-CAM V25, knocked up a quick pocketing job based on a square and a circle and ran it, this is the last quarter of the run and it looks spot on ;-)

Here's a link to the video -

 
[6]
[5] [7]
Top