[4]

Clausing Kondia inop

[3]
[10] Like what you see?
Click here to donate to this forum and upgrade your account!

Riorider

Newbie
Registered
Joined
Apr 2, 2015
Messages
4
Bought fv1 at an auction got it home (rough ride!) wire up and have no power up to control panel!What should I look for machine was said to be in good running shape when removed! CNC control is Dynapath 10
Thanks
 

markba633csi

H-M Supporter - Gold Member
H-M Supporter - Gold Member ($25)
Joined
Apr 30, 2015
Messages
3,171
Try to track down a schematic diagram for it- check for blown fuses and loose / corroded connections
Be very careful testing live circuits!
mark
 

Silverbullet

Gold
Registered
Joined
May 4, 2015
Messages
3,420
Riggers that remove machines are not real worried about the next guy. Ck for broken ends , busted contact starters , Ck the voltage it was wired for. Missing fuses and so on.
 

Shootymacshootface

Active Member
Registered
Joined
Mar 17, 2018
Messages
261
Bought fv1 at an auction got it home (rough ride!) wire up and have no power up to control panel!What should I look for machine was said to be in good running shape when removed! CNC control is Dynapath 10
Thanks
Did you ever get this figured out?
 
[6]
[5] [7]
Top