Cnc Build Underway

I have made some progress on the CNC mill. The dang thing is so heavy now we will have to use a forklift to budge it. There is LOTs to do still. I will be adding lots of cross supports and gussets over time. I made the head with a 6" square thick wall and everything is based around it. The spindle is on and the spindle motor is on. The pictures do not do justice to the weight and size of this "little" machine. The table is 1 1/4" thick solid steel 36" x 28" super heavy but slides like butter on the linear rails.

20160611_151109.JPG 20160611_151117.JPG 20160611_151126.JPG
 
That is quite a mill. Looks like it does a fine job. :encourage:
 
Back
Top