Collet something?

JohnCT

Registered
Registered
Joined
Feb 2, 2018
Messages
33
must be a piece of scrap I don't need
 
Last edited:
Looks like an expanding collet - good for clamping inside bores. It also looks like your lever collet closer is missing some pieces, but I'm not sure. Usually the lever sticks out horizontally.
 
Yeah the bracket in the back isn't hooked up, didn't feel like unbolting the door to install something I don't think I'll use
 
Ied callit usefull and wouldn’t scrap it you’ll probably regret it, the pic is gone ?
 
Last edited:
Are y'all seeing a picture of something. All I see is text.

Tom
 
Apparently he edited the pic out , it was there yesterday :guilty:
 
The hole (at the "top" of the lever must be in a pivot, to apply/release pressure on the collet to close/open it. It appears that when tightening the collett, it (the collett) would expand inside a cavity. In general, collets contract about a diameter.
Thanks for the images.
 
Back
Top