- Joined
- Sep 2, 2013
- Messages
- 5,090
Started working on using a VFD on a compressor I picked up. It has a 2hp 3 phase motor on it but I have a 3 hp, 3 phase on the shelf that i will be using. Will be trying out a 10hp VFD I got on amazon. The 220 single phase in, and the 3 phase out wiring is pretty straight forward, but i need to run the pressure switch function off of one of the low voltage connections. Think I may have it figured out, but wondering if anyone here has done it on a similar setup, and has a method that worked for them. Thanks, Mike