Controller for BLDC Motor

[jbolt]

I have a BLDC motor I want to use for a live spindle project but am unsure about what type of drive/controller it needs?

Specifications:

Model #. MBL-92GN-300HA

220V
1100W
4.3A
1.8Nm
6000r/min
IC: F
EC: IP54

3 wire main U,V,W

Hall Supply: +5v, GND, SA, SB, SC

 

[JimDawson]

Maybe something like this https://www.aliexpress.com/item/32848051522.html

Google BLDC motor controller 220V

 

[homebrewed]

One of these?

 

[jbolt]

Would this one work? Link

 

[JimDawson]

Would this one work? Link

It looks like it would work. It does not specifically say it is rated for single phase input, but it looks like it is running on single phase in the video. I would check with the vendor to confirm.

 

[jbolt]

Nope that one is 3-phase input only. Grrrr...

If the motor is rated to 300vdc max, realistically what voltage can it run at? Of the BLDC controllers I can find the specifications can be a bit confusing.

How about this one? Link

I think I opened a can of worms trying to use this motor.

 

[JimDawson]

Nope that one is 3-phase input only. Grrrr...

If the motor is rated to 300vdc max, realistically what voltage can it run at? Of the BLDC controllers I can find the specifications can be a bit confusing.

How about this one? Link

I think I opened a can of worms trying to use this motor.

That one looks like it might work.