Custom pellet gun pellets

Braeden P

Registered
Registered
Joined
Sep 1, 2020
Messages
1,575
My pellet gun is a 0.177 so I made the pellet 0.170 and left the burr so that it would expand into the riffling and it worked 30 yard shot 1/2 inch in a oak board
 

Attachments

  • image.jpg
    image.jpg
    2.7 MB · Views: 129
  • 3864765A-CB08-462C-B8AE-9151731F399E.jpeg
    3864765A-CB08-462C-B8AE-9151731F399E.jpeg
    1.5 MB · Views: 124
While it may work great, that looks like it will be very hard on the rifling. Now if you were to machine a mold and cast that in lead.......
I should made a mold for lead and the pellet gun was left out so the barrel is garbage but it does not do anything because the barrel is hardened steel the pellet under size by 7 thou and the only part that touches it is the bur
 
I have a break barrel pellet rifle that shoots 1250 fps. Sounds like a .22 and kicks like a 12 gauge due to the massive spring.
 
400 fps? ~27 mph, ~43 kph. Do little league baseball pitchers (or anyone over 8 years old) have to register their throwing arm as a deadly weapon?
 
Back
Top