Cutting Oil Container

Kroll

Active User
H-M Supporter Gold Member
Joined
Dec 23, 2012
Messages
1,307
Guys other day watching some YouTube’s and several of them showing what look like a small plastic container with acid brush in a center hole in the lid.The plastic was maybe 4” dia but look like only couple inches tall so harder to turn over.Where can a person find these,not knowing what they are calling google is no help
 
I use a small squeeze bottle from hand sanitizer that i pressed a pop rivet without the arbor into the top, and jammed a short 1/8 spray tube from a can of brake cleaner into the rivet. Squeeze out 1 drop or more of Kool Tool at a time.
 
Being a cheapskate I use used printer ink refill bottles. They are only 1" dia, approx 2.5" high and have a 2" long fine tube and allow a (hand held) drip feed directly at the point of cut.
I have three with different cutting fluids in each.
Another container I have is a dye bottle from the wifes hair products. Holds more than the ink container.
 
Back
Top