D1 camlock

If you have a set of calipers, measure either the external size of the pins or the inside diameter of the pin hole. Pin size will be able to tell what size it is.
 
How about a picture. That seems odd.
 
You probably don't have a D1 camlock. As ddickey said, D1 cam locks either have 3 pins (D1-3 & D1-4) or 6 pins (D1-5 to D1-11). Unless someone removed 2 pins but that would be pretty obvious. Never heard or anyone removing 2 pins though, have only seen people remove 3 of 6.

What lathe do you have?
 
Type D Camlock Mount



For quick measurement of chuck mounting dimensions, measure from center of spindle to center of pin, “D”.


---------------------------------------------------
PIN
SPINDLE A B C D DIAM.
---------------------------------------------------
D1-3" 3-5/8 2.1250 7/16 1.391 .5937
D1-4" 4-5/8 2.5005 7/16 1.625 .6562
D1-5" 5-3/4 3.2505 1/2 2.0625 .78125
D1-6" 7-1/8 4.1880 9/16 2.625 .90625
D1-8" 8-7/8 5.50075 5/8 3.375 1.03125
D1-11" 11-3/4 5.75075 11/16 4.625 1.21875

Cheers
Martin
 
Possibly a proprietary chuck mount. Make and model of lathe and pics would help immensely.
 
Back
Top