Designed By Memory - 3d Printing Projects

MemorY

Registered
Registered
Joined
Oct 10, 2016
Messages
25
Hey guys!

I'm just wanting to start this thread to share with you all some of the 3D printing projects that I'm doing and working on, and future projects as well.

First up, Grenade Face. Based off of one of the Knights of Ren (Star Wars VII). We don't know much about the character, and get just a slight glimpse of him/her in the film when Ray has the vision and sees Kylo and the other Knights in the rain. I created the model in Rhinoceros based off of reference material and concept art that I found and was provided by Dutch Props. This was a final project that I did for my 3D printing class in school. The final project was printed at 50% scale, but I'm currently (Dec. 2016) working on printing all the pieces for a full scale version and hope to be done before the New Year. For this project I printed all of the pieces on the new Ultimaker 3 and used up all of my PVA support material (water soluble = freaken AMAZING!!) For the full scale I'll be using my Ultimaker 3 and my Creatorbot Pro II.

Pictures!! :D
c38ff474d6058d39eb5cbbf149630699.png

5309193215298e07ac97974571a0db2a.jpg

03485b9ca1d88096d3770012fde65db4.jpg

6fd7f7f814b82ea668ea34b2ea58cd7d.jpg

99592eb329400296a9eed7e2773db714.jpg

4038be36f5caa10ed53794f4b73a7a6b.jpg

55446b44f062e4f785e6397cb15ca774.jpg

dc9fe2d2c91ca43aa88d8dd7135b5f39.jpg

2e106b94496f94b211211c7398e8d01f.jpg


I hope that you all enjoy checking this out!! More will come!


Sent from my iPhone using Tapatalk
 
Back
Top