[4]

Did I do well??? FB marketplace finds...

[3]
[10] Like what you see?
Click here to donate to this forum and upgrade your account!

TerryH

I have no clue what I'm doing...
H-M Supporter - Gold Member ($25)
Joined
May 8, 2018
Messages
323
Likes
492
#1
Afternoon all. During my daily perusing of FB marketplace, Craig's list and such I came upon these 2 items. Lady that had the was totally clueless about them and I'll admit that I'm not much better off. Any info is appreciated.

First up is a Mahr machinist level. Can't seem to find much on it but I took the plunge for $75. Quick 180 degree check on my main bench that I "thought" was level showed the level is dead on in both planes but the bench is not.









I'm more confident in this being a good deal as I can see plenty of info on line on this Interapid test indicator. $90 for what you see. I did replace the deteriorated foam in the lid. It appears to work as intended even though I can't seem to figure out how the arm fits into the box or if it was intended to in the first place.







 

JimDawson

Global Moderator
Staff member
H-M Platinum Supporter ($50)
Joined
Feb 8, 2014
Messages
7,138
Likes
5,384
#2
Looks like you did OK. :encourage: I think you have to take the clamp off of the rod to get everything to fit in the box properly.
 

TerryH

I have no clue what I'm doing...
H-M Supporter - Gold Member ($25)
Joined
May 8, 2018
Messages
323
Likes
492
#3
Looks like you did OK. :encourage: I think you have to take the clamp off of the rod to get everything to fit in the box properly.
Thanks Jim! As of yet I have been unable to get the clamp off the rod. Trying not to mess anything up but it is some kind of stuck.
 

Bob Korves

H-M Supporter - Sustaining Member
H-M Platinum Supporter ($50)
Joined
Jul 2, 2014
Messages
5,647
Likes
5,958
#4
The rod and clamp did not come with the indicator.
 
[6]
[5] [7]
Top