- Joined
- May 10, 2012
- Messages
- 991
I did a repair on a bevel gear with all but one of it's teeth missing by building it up with brazing material and then filing it to shape. It was a bit dedious and looked like crap when it was done, but it worked. It was on the table lift of a shaper, so as long as you loosen the bolts holding the table firm before you try to crank it, it doesn't see much stress. Here's the tread:
https://www.hobby-machinist.com/threads/bevel-gear-repair.50352/#post-433389
https://www.hobby-machinist.com/threads/bevel-gear-repair.50352/#post-433389