Dimension correction for error in drawing of Atlas 9-304 Compound Slide Gib

wa5cab

Downloads Moderator
Staff member
H-M Lifetime Diamond Member
Joined
Dec 25, 2011
Messages
10,477
Anyone who downloaded the cleaned up PDF of the factory drawing of Atlas part # 9-304, please download the corrected copy. The version of the drawing just replaced showed the flat bottom holes for the gib screws and located 1/64 down from the top of the gib. The correct value is 7/64". I doubt that anyone (there were several downloads) has yet actually tried to use the drawing to make a gib because it obviously wouldn't have worked, and they would have said something here.
 
Back
Top