Diy one shot oiler from eBay??

farmerken82

Registered
Registered
Joined
Sep 21, 2017
Messages
8
Anybody bought one of these knockoff one shot pumps? I have no oiling system on my newly purchased 1973 Bridgeport J head save the zerks, but figured it might be worth my time to build a one shot system if these cheapos work for a while?

https://m.ebay.com/itm/122610375901

Thoughts? Or should I just suck it up and buy that syringe looking thing from Germany? -Kenny

Sent from my Moto G (4) using Tapatalk
 
I have a Taiwan version on my Grizzly G1008. I purchased the mill this past January. The oiler had broken sight lens, broken top, the oil had gone solid in the bottom. I was able to clean and get this working. I like the unit. Only needs a partial stroke to move the oil.

The EBay ad does not state the model. May be a larger version than mine but looks to be the same design.

I replaced the top which had cracks on all 4 corners with a piece of plexiglass. I will need to remove the 4 screws to fill, but it will take me a long time to need to fill this. I like the clear view of the level.

Mill_manual_lube_pump_cleaned_fixed_7543.jpg
 
Back
Top