- Joined
- Sep 24, 2017
- Messages
- 550
I have no dies for it and I have no use for it. So I'm going to sell it on the ebay problem is that I live 1200km from the European border so the freight gets so expensive
-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
Do not know what it's called in English
- Thread starter fernballan
- Start date
- Joined
- Oct 15, 2011
- Messages
- 153
I am retired from the Australian metal fabrication / welding trade.
In our neck of the woods,the machine was referred to as a section roller.
The section reference was undoubtedly due to the material cross section. For example angle iron that the layman refers to is Angle Section in our trade parlance.
Ozwelder
In our neck of the woods,the machine was referred to as a section roller.
The section reference was undoubtedly due to the material cross section. For example angle iron that the layman refers to is Angle Section in our trade parlance.
Ozwelder
- Joined
- Apr 30, 2015
- Messages
- 11,255
Wow. Great torture device. Why did you resign #6?