Dual PID Controller

jbolt

Active User
H-M Supporter Gold Member
Joined
Dec 3, 2013
Messages
1,844
A small project I have had the parts for a while now. The only machining was the cutouts in the steel sheet metal enclosure which I did on my little CNC router. 1/8" carbide endmill, 8k spindle and 3 inches perminute at a cut depth of .01"

The idea is to have a universal controller that can be used across several devices.

Today I used it while heat treating a custom tool to control a hot plate to preheat quench oil and a small oven for anealing.
569f28a3dd77e6a26569b78277187a70.jpg
84f52bf6fc654b4ae7285f479ac8a8ad.jpg
ec8e8f98b2a95560ef0891d8aab8b5f2.jpg
54a1fbc49aa1bf4ed5fcd101fdf98909.jpg
c67a5c28c847ecc588bfacc935d0810c.jpg


Sent from my SM-G955U using Tapatalk
 
Yep, I did the same thing. These controllers are amazingly inexpensive ($13 or so as I recall). I used one to switch a 100 watt lightbulb inside an ice chest to brew Kombucha at just the right temperature.
 
Back
Top