El Hefe Lives

Started a new quill stop today. Its made from a chunk of 3x.625 1018. The original quill stop only had 1 bolt holding it in place, a5a211c3a2620b4a3e08f44c171c0ff1.jpg3e2a231f8b9c1effd5f77e9c777a9d40.jpg67144a65d665457488e1bd51c7401aa2.jpg I forgot that I do not have a drill chuck yet so I cannot finish it until I get one.

Sent from my LG-LS980 using Tapatalk

a5a211c3a2620b4a3e08f44c171c0ff1.jpg

3e2a231f8b9c1effd5f77e9c777a9d40.jpg

67144a65d665457488e1bd51c7401aa2.jpg

a5a211c3a2620b4a3e08f44c171c0ff1.jpg

3e2a231f8b9c1effd5f77e9c777a9d40.jpg

67144a65d665457488e1bd51c7401aa2.jpg

a5a211c3a2620b4a3e08f44c171c0ff1.jpg

3e2a231f8b9c1effd5f77e9c777a9d40.jpg

67144a65d665457488e1bd51c7401aa2.jpg

a5a211c3a2620b4a3e08f44c171c0ff1.jpg

3e2a231f8b9c1effd5f77e9c777a9d40.jpg

67144a65d665457488e1bd51c7401aa2.jpg

a5a211c3a2620b4a3e08f44c171c0ff1.jpg

3e2a231f8b9c1effd5f77e9c777a9d40.jpg

67144a65d665457488e1bd51c7401aa2.jpg
 
Dude, you should have said something when you stopped by. I would have loaned you one. :)
 
I didn't think about it until i needed to drill.

Sent from my LG-LS980 using Tapatalk
 
Ordered all of my vfd control panel parts today. Should all be here by wednesday. Im thinking the bland white box is gonna need a good carbon fiber wrap

Sent from my LG-LS980 using Tapatalk
 
Are you installing a illuminated switch or other indicator that shows power is on? I just put in a order for a LED lit e-stop button, as I keep forgetting to turn off the power to the mill (I changed the VFD fans to temperature controlled in the settings so now I don't even hear those). I'll have to switch from negative to positive and run a return ground for the LED but I think that's it.
 
Im installing a standalone led, hooked up to a keyed switch. From there it will go out to the e stop switch, and then on to the fwd rev switch. Im installing the key because the mill is at my dads. I dont want just anyone trying to use it while I'm not there.

Sent from my LG-LS980 using Tapatalk
 
Back
Top