Enco model 110-2034 Lathe

Does this help? Mine is a 110-2072, 1989 vintage.

IMG_0358.JPG
 
Can you post a picture of your box? Maybe between us owners we can figure it out. It seems to me that the manufacture followed a basic pattern.
 
This is what mine looks like
 

Attachments

  • IMG_20180409_222607613 (Small).jpg
    IMG_20180409_222607613 (Small).jpg
    58.6 KB · Views: 13
  • IMG_20180409_222614782 (Small).jpg
    IMG_20180409_222614782 (Small).jpg
    60.7 KB · Views: 13
What wires are in question?
 
The wires on the lower right on the terminal strip. Mine got pulled out. See photo
 

Attachments

  • 20210515_182150.jpg
    20210515_182150.jpg
    3.1 MB · Views: 15
  • 20210515_182114.jpg
    20210515_182114.jpg
    1 MB · Views: 15
So I got some of it. From right to left:
1 brown wire from left group of wires (ones in your hand)
2 ?
3 2 blue wires
4 brown wire from right group
5 2 green/yellow wires
6 black wire
 
Ok. Thank you. That leaves 1 brown wire left in the group in my hand ( there's 2 in that bundle) Maybe that goes to#2 terminal ?
 
Back
Top