Erickson 30 taper shell mill arbor

sasanifab

Registered
Registered
Joined
Oct 3, 2020
Messages
80
For the life of me I can't seem to find a 30 taper 1.5 inch shell mill arbor. I have have seen them in the 30 taper but not for the quick Change ". I know some guys modify the regular 30 but for a shell mill arbor I'd imagine that's stupid . If you can find me one I'll give you a dollar.
 
By quick change, do you mean the B&S camlock? They seem to be quite rare, I suspect that they never caught on widely, I have 30 taper camlock on my B&S mill's universal angle head, most all I ever found were a bunch of camlock end mills, I finally drilled the spindle hollow for a drawbar and added driving keys for the standard holders, so modified, I can use either style, I also have a vertical mill that uses 30 taper with a drawbar, I like it much better than R-8 as it is easier to make tool changes due to the shorter tools combined with the relatively steep taper.
 
It's the Erickson "kwick switch" 30 taper
 

Attachments

  • 6811D044-A49D-406E-B5B1-1152D29EF04A.jpeg
    6811D044-A49D-406E-B5B1-1152D29EF04A.jpeg
    264.4 KB · Views: 10
Back
Top