Escape 2001 Vacuum Lines Melted EGR Valve Replace with Stainless tube ?

Got the upper tube in place. Thought I had a small OD tube bender from plumbing days with flaring tool. no go there

Just bent them by hand. Rubber is 1/2" OD 1/8" ID , could have just ran a long piece and wire ties, but stayed on the plan.

Got the new tensioner pulley in so that's good to go.

No Vacuum layout diagram under the hood or anywhere.

 
SS tubes replaced and new EGR Valve installed. Time to make pressure manifold now.



 
Back
Top