Example of improper clamping

coolidge

Active User
Registered
Joined
Dec 18, 2013
Messages
2,012
Just a heads up on how not to clamp your work down.

 
Last edited by a moderator:
toe clamps are available, unfortunately, those clamps are not toe clamps
 
I was expecting it to come all the way out and go flying.
 
It might have gone a little better if instead of taking a full cut with auto feed he tried a test cut and fed manually. I realize that an experienced guy might not need to, but the video shows that he's not all that experienced.

Also, wearing a watch.
 
When he hit the auto feed I thought, here it goes, that block is going to shoot right at the operator.
 
Back
Top