- Joined
- Jun 12, 2017
- Messages
- 2
A Victor 1340 lathe was donated to my makerspace, and in the process of preparing it for use I found some issues in the feed gearbox.
The "E" position spur gears are damaged and the countershaft end bearing is shot, likely the cause of the gear damage.
If you know of a donor machine, I am interested. There is likely other name plates with the same parts, but Idon't know what they are.
The "E" position spur gears are damaged and the countershaft end bearing is shot, likely the cause of the gear damage.
If you know of a donor machine, I am interested. There is likely other name plates with the same parts, but Idon't know what they are.