Ulma Doctor

Infinitely Curious
Registered
Joined
Feb 2, 2013
Messages
3,540
I made some Snow People from cedar fence boards 3/4" thick
i used a planer to smooth the faces of the boards then,
i used a jigsaw to cut the head shapes out.
2015-12-19.jpg

Painting was accomplished by roller and exterior latex paint for the main color,

2015-12-19.jpg
then accented with hobby acrylic paints.
2015-12-19.jpg
you can't really tell by the photos,
but there is glitter spray paint on the finished effigies as well as a coat of polyurethane clear coat to try to retain the glitter.

2015-12-19.jpg
I used a trim router to recess a 1/4" deep groove x 3/4" wide in the baseboard .
I then ripped down a reclaimed pallet stringer board to make some supports to run along side of the groove to create a deep channel to hold the snow people steady...

2015-12-19.jpg
The hats and scarves were purchased from a Goodwill Store here in town very inexpensively.

Thanks for taking the time to look and read!
Merry Christmas to All!
 
Last edited:
Back
Top