- Joined
- Sep 22, 2019
- Messages
- 89
I recently purchased a Foredom Flex Shaft. The mounts Foredom sell are fixed to the bench. I am running out of space so I designed and made one that can be moved around.
The stand is 3/4" black pipe attached to a disk brake a friend gave me. Attached are a couple of photos and a link to a video that gives more detail.
I also made the 3/16" mandrel that's in the tool holder. It's made out of 1/2" cold rolled round bar.
The stand is 3/4" black pipe attached to a disk brake a friend gave me. Attached are a couple of photos and a link to a video that gives more detail.
I also made the 3/16" mandrel that's in the tool holder. It's made out of 1/2" cold rolled round bar.
Last edited: