Generator's Magnetic Center

For anyone wanting to do this just take the side cover off the engine and the engine crank.
Cut the crank next to the journal and mount the cover and sawed off chunk of the engine crank
back on the getset. The long bolt that goes through the generator will draw the crank stub tight.
Bolt the engine side cover with the bearing back fast to the genset. Your good to go.Generator fix.jpg
 
Pictures or not , the illustrations show a good way to do it. My concern is holding the generator end firm enough to keep it from shaking its way off with one mount on the generator it relied on the motor to be bolted to it . Under a load it will twist itself right off a rubber mount . You'll need four on just the generator end.
 
Back
Top