- Joined
- Nov 9, 2018
- Messages
- 377
Getting ready to order this PM1228, anybody care to stop me before I potentially do something incredibly stupid?
I make prototype car parts, do NOT do any production. Largest thing I plan on is maybe 280mm flywheels and air-cooled aluminum cylinders (160mm OD).
Good:
I plan on converting to electronic lead screw pretty early, and of course DRO, and casting a concrete table to set it on.
I’m 99% sure on the 1228, but still maybe thinking about the 1236.
I make prototype car parts, do NOT do any production. Largest thing I plan on is maybe 280mm flywheels and air-cooled aluminum cylinders (160mm OD).
Good:
- BLDC variable speed.
- electronic brake and reverse.
- good external size (I'm massively constrained on space)
- does not come with 4-jaw.
- only 110V, not avail with 220.
- is it rigid enough for mostly steel cutting?
I plan on converting to electronic lead screw pretty early, and of course DRO, and casting a concrete table to set it on.
I’m 99% sure on the 1228, but still maybe thinking about the 1236.
Attachments
Last edited: