Grizzly G0613 Accessories

JEWLSCustoms

Registered
Registered
Joined
May 11, 2021
Messages
9
Just picked up a Grizzly G0613 horizontal band saw. So far, I'm very happy with the quality of the machine and it's cuts. The only issue I have is coolant leaking when cutting tubes. The sides of the fences have RivNuts in them, but I don't see any accessories from Grizzly to add drip pans. Anyone made up their own?
 

Attachments

  • PXL_20210607_185925561.jpg
    PXL_20210607_185925561.jpg
    1.8 MB · Views: 117
  • PXL_20210607_185914091.jpg
    PXL_20210607_185914091.jpg
    1.6 MB · Views: 116
  • PXL_20210607_185906720.jpg
    PXL_20210607_185906720.jpg
    1.6 MB · Views: 119
  • PXL_20210607_185858354.jpg
    PXL_20210607_185858354.jpg
    1.6 MB · Views: 121
I’ve had the same saw for about 3 years. I like it, other than that for large stock I’d drop the stand height considerably. I haven’t done anything with the sides yet, but plan on rollers to extend the bed.
 
Does that black pan you have mounted on the backside bolt onto the front side too? Did that come with the bandsaw? If yes you could probably buy a spare one of those. Grizzly does a great job supplying spare parts. Or just make you own that way you can make it exactly to the size you need.

Cooking pans are cheap if you don't want to make your own pan. I made a chip tray out of one for my old Enco 4x6.
 

Attachments

  • Img_6806.jpg
    Img_6806.jpg
    60.8 KB · Views: 111
  • Img_6809.jpg
    Img_6809.jpg
    58.1 KB · Views: 109
Back
Top